TTE880 THE08 RS4 / S4 B5 UPGRADE TURBOCHARGERS

€5,881.51 *

Prices Do Not Include VAT. Shipping is calculated at checkout.

Delivery time 15-30 Working Days

  • TTE10455
  AUDI RS4 / S4 B5 / A6 C5 ALLROAD TTE880 THE08 UPGRADE TURBOCHARGERS  ... more
Product information "TTE880 THE08 RS4 / S4 B5 UPGRADE TURBOCHARGERS"

 

AUDI RS4 / S4 B5 / A6 C5 ALLROAD TTE880 THE08 UPGRADE TURBOCHARGERS

 

Welcome to our Ultimate level for the 2.7 T motor, using THE 08 exhaust turbine housings.  Developed from our TTE880 series. These are maybe the pinnacle of RS4/RS6 type hybrids offered anywhere for power.


Engineered & Enhanced


TTE880 THE08 Turbochargers and a combanation of Genuine RS4 K04 OE and THE TUNER  housings that are combined.   These units offer your 2.7T motor huge power potential and have been proven at over 900ps on 102 fuel.  


TTE880 THE08 has RS4 compressor covers with larger TTE CNC billet inlets that we CNC machine in house to an optimum clearance to allow fitment and maintain the efficiency of a larger highly advanced billet high-pressure compressor wheel. This billet compressor also has a very high efficiency. We also give these compressor cover outlets some extra attention porting and polishing the boost discharge outlet to smooth the airflow to the boost pipework for improving efficiency.

The Compressor wheel being a 7 blade billet milled high-pressure anti-surge geometry compressor wheel, promoting greater airflow and pressure using a low inertia wheel that performs like a wheel of even greater size and mass. 7+7 Blade technology and lightweight enables lower boost threshold giving the user faster spool-up at lower engine speeds while providing the high boost with much less heat for powerful top-end performance.

THE Tuner 08 exhaust turbine housings are CNC milled in-house to allow fitment of a far larger 9 blade turbine to an optimum clearance for maximum efficiency.   Offering a bigger 44mm exhaust entry port and bigger 08 volute from a stock size RS6 housing.


Turbine and shaft being TTE 9Blade items. Very light in weight and high flow means these can handle significantly more exhaust gas volume compared to conventional turbines without excessive backpressure and give fast response.

Special profile 360 deg TTE developed high-performance motorsport journal bearing system are fitted, to remain durable at higher loads with no loss in transient response.

Actuators used are uprated sprung OE units fitted with our reinforced clamps for trouble-free operation. These also can also be modified/set to customer needs and specifications.

Equilibrium

Precisely balancing our turbochargers is a key critical factor to become a TTE upgrade unit as longevity and performance are paramount. Good balance improves acoustics also.  Subsequent great care is taken with all TTE turbochargers to achieving our balance standards. Firstly parts are balanced at slow speeds up to 2800RPM in multiple planes using our single parts machine, then components are assembled and then the CHRA are dynamically balanced, but this time depending on application at up to 250,000 RPM in multiple planes using our in-house VSR machine to acquire the ultimate equilibrium, to a standard far higher than OEM. Each turbocharger is supplied with serial numbered balance test result document.

Features

  • Genuine BorgWarner RS4 compressor housings and bearing housing
  • THE Tuner 08 CNC modified exhaust housings
  • TTE Latest 50.5MM Inlet billet compressors
  • CNC Ported compressor housings
  • TTE 9 blade high-flow low-mass turbines
  • TTE Reinforced Motorsport bearing system
  • Genuine BorgWarner Modified reinforced and synchronized actuators
  • TTE CNC Billet 58mm inlets (Viton O-Ring seals inc)
  • Installation as original RS4 K04 (with regard to oil and water line, all else see bellow)
  • 900+PS capable 
  • Single parts finely balanced then components assembled and core high-speed VSR balanced
  • Supplied with a balance test result document
  • Proven TheTurboEngineers quality
  • Made in Germany
  • Price shown is for a PAIR of turbochargers 

Please check out our TTE HEAT SHIELD ISOLATION ADD-ON option that’s available.  

 PLEASE NOTE : IT IS RECOMMENDED THAT ANYONE CONSIDERING FITTING THIS TURBO UPGRADE HAS THE-RS4 /S4 B5 UPGRADE OIL PUMP INSTALLED. THIS IS REQUIRED FOR WARRANTY

We recommend the use of THE-tuner turbo inlets and exhaust manifolds for the perfect set up and fitting 

 tte880-08-dyno-600-SIZED

 

 

Related links to "TTE880 THE08 RS4 / S4 B5 UPGRADE TURBOCHARGERS"
Read, write and discuss reviews... more
Customer Review for "TTE880 THE08 RS4 / S4 B5 UPGRADE TURBOCHARGERS"
Write an Review
Reviews will be activated after verification.

The fields marked with * are required.

Viewed