Prices Do Not Include VAT. Shipping is calculated at checkout.
Delivery time 30-50 Working Days
- Product Number: TTE10359.1
- Upgrade Your Turbo: YOU WILL BE EMAILED INSTRUCTIONS AND PACKING SLIP FOR SENDING YOUR TURBOCHARGER/S AFTER CHECKOUT.
AUDI 4.0 TFSI RS6, RS7, S8, S7, S6, A8 TTE RS C7 UPGRADE TURBOCHARGERS
BENTLEY CONTINENTAL GT V8 / V8S UPGRADE TURBOCHARGERS
TTE C7 RACE is our OEM RS performance upgrade turbochargers for the 4.0 TFSI. Same power & response as original but with added durability from an upgrade TTE bearing system, motorsport clearance, and balanced core for stage 1, 1+ or 2 tuned cars.
This is a direct bolt-on replacement of your worn out or damaged factory RS6 / RS7 turbos.
These units are a direct swap vs RS6/RS7 turbochargers with no special software calibration required.
S6/S7/S8 will require software for RS6/RS7 turbochargers. (APR Stage 3 Software RS turbos, being a great choice)
Engineered & Enhanced
To construct a pair of TTE C7 RACE Turbochargers we use Genuine IHI factory RS6/RS7 C7 Turbochargers but we change the original bearing system for our proven TTE upgrade bearing pack to ensure long term reliability at higher boost levels that are used on Stage 1 & 2 and 2+ or 3 software ECU calibrations from all software providers.
Precisely balancing our turbochargers is a key critical factor to become a TTE upgrade unit as longevity and performance are paramount. Good balance improves acoustics also. Subsequent great care is taken with all TTE turbochargers to achieving our balance standards. Firstly parts are balanced at slow speeds up to 2800RPM in multiple planes using our single parts machine, then components are assembled, and then the CHRA are dynamically balanced, but this time depending on the application at up to 250,000 RPM in multiple planes using our in house VSR machine to acquire the ultimate equilibrium, to a standard far higher than OEM. Each turbocharger is supplied with a serial numbered balance test result document.
- A pair of TTE RS C7 RACE Upgrade Turbochargers
- Genuine IHI CNC housings
- Genuine IHI Compressor wheels
- Genuine IHI turbine/shafts
- TTE Upgrade bearing pack
- Optimised clearances for max efficiency & power
- Single parts finely balanced then components assembled and core high-speed VSR balanced
- Supplied with a balance test result document
- 700ps+ proven
- Perfect choice to match all ECU software providers, stage 1 or 2 & 2+ & 3 calibrations (UNITRONIC, APR, DVX, JDE, REVLIMT, BEVO, REVO, MRC & Many More)
- Proven TheTurboEngineers quality
- Made in Germany
- The price shown is for a PAIR of turbochargers