TTE950 F8 UPGRADE TURBOCHARGERS

ONLY AVAILABLE BASED ON YOU SUPPLYING TURBOCHARGERS FOR THE TTE UPGRADE PROCESS. 

FERRARI F8 TTE950 UPGRADE TURBOCHARGERS

Welcome to our TTE950 Stage 3 Twin-Scroll Turbocharger upgrade for the Ferrari F8 3.9 twin-turbo V8 power plant. 

To construct a pair of TTE950 turbos we removed the original compressors and employ a larger and more efficient billet compressor wheel and mill the compressor cover to the optimum gap to match the new compressor profile. We also fitted large TTE 9 blade Low-Mass turbines in the turbine exhaust housings for greater flow and lower exhaust gas temperatures at high boost and fitted our TTE Motorsport upgrade bearing pack for durability. This combination gives great power potential but also a fast boost response for the ultimate hybrid turbocharger upgrade.  

Equilibrium

Precisely balancing our turbochargers is a key critical factor to become a TTE upgrade unit as longevity and performance are paramount. Good balance improves acoustics also. Subsequent great care is taken with all TTE turbochargers to achieving our balance standards. Firstly parts are balanced at slow speeds up to 2800RPM in multiple planes using our single parts machine, then components are assembled and then the CHRA are dynamically balanced, but this time depending on the application at up to 250,000 RPM in multiple planes using our in house VSR machine to acquire the ultimate equilibrium, to a standard far higher than OEM. Each turbocharger is supplied with a serial numbered balance test result document.

• Original Genuine Ferrari turbochargers as base parts
• TTE Billet Milled compressor 7+7 BLADE
• TTE High-Flow 9 blade Turbine
• TTE Upgrade Motorsport bearings
• 950PS+  Capable 
• Software recalibration is required 
• Plug & Play installation 
• Proven TheTurboEngineers quality
• Single parts finely balanced then components assembled and core high-speed VSR balanced
• Supplied with a balance test result document
• Made in Germany
• The price shown is for a PAIR of turbochargers 

Please check out our TTE HEAT SHIELD ISOLATION ADD-ON option that’s available.  

ONLY AVAILABLE BASED ON YOU SUPPLYING TURBOCHARGERS FOR THE TTE UPGRADE PROCESS. 

PRICE IS BASED ON TURBOCHARGERS SENT BEING IN GOOD CONDITION.  IT MAY BE POSSIBLE TO REPAIR & UPGRADE DAMAGED TURBO'S BUT WOULD BE PRICED ON INSPECTION 

IMPORTANT INFO 

2 washers are enclosed with the turbos. These must be inserted under the speed sensor to install the turbos, so that there is sufficient clearance OR damage is inevitable! Also needed is to reprogram the speed sensor, as the turbines now have one blade more!  AFTER INSTALL CHECK TURBOCHARGERS SPIN FREELY