Products from THE-Tuner

Complete Kit: THE cable set for TFSI ignition coils 6x NGK ignition coils VW / Audi plastic adapters

THE Motorsport RS4 / S4 b5 gearbox mounts Designed for tuned performance cars. Manufactured from billet aluminum High-durometer rubber Increased performance Improved shifting & control

THE-RS6 C5 Air System Blanking Plates The factory fitted the Audi RS6 c5 with a secondary air injection system. With this set, it is possible to close the holes on the cylinder head and it can be the whole system removed. The set...

THE-RS6 C5 4.2 V8 Exhaust Manifolds Our manifolds are exclusively manufactured from 1.4828 heat-resistant stainless steel pipes. In contrast to conventional stainless steel , the 1.4828 stands out with a minor thermal expansion, high...

THE-RS6 C5 V8 4.2 Head Gasket Set With this thicker seal, a compression of 9.2: 1 is achieved.

THE-Tuner AUDI 4.0 TFSI High-Performance Cast Exhaust Manifolds Higher flow to turbocharger of choice 1.4849 Stainless Material

THE-Tuner UPGRADE AUDI RS4 / S4 B5 Oil COOLER 4 Row Larger volume Reduced oil temps Exhibits minimal pressure loss Aluminum construction Billet CNC endtanks TIG welded OIL Cooler Pipes can be found here : LINK

THE RS4 / S4 B5 Oil Catch Tank & Oil Management System, oil separating catch can system for 2.7 TT V6 engine cars.

THE- Audi RS4 / S4 B5 High Flow Intake Manifold Info, no original rail fits on our intake manifold Advantages over the original RS4 manifold: Larger and improved channel guidance Higher flow Uniform constant narrowing of the...

THE- Upgrade RS4 / S4 B5 MAF Hose This is the Silicone hose joiner for between the THE-Tuner Y Pipe and MAF available in two versions: 102mm to 90mm Reducer is for OEM MAF 102mm 102mm for THE- Tuner MAF Both silicone tubes are made with...

THE-Throttle Body cast Y is developed by us and is based on the OEM cast piece of the RS4. It is made of cast aluminum and then CNC machined. It sits on the OEM position and it can be used with THE pressure pipes or org. RS4 pressure...