TTE500 5157 TOYOTA G16E-GTS GR YARIS, COROLLA UPGRADE TURBOCHARGER

TTE500 5157 UPGRADE TURBOCHARGER TOYOTA G16E-GTS GR YARIS, COROLLA & TTE Billet Inlet adapter (suited for Forge upgrade turbo inlet/elbow)

TOYOTA GR YARIS & COROLLA Plug & Play Hybrid Turbocharger 

Engineered & Enhanced  

To construct a TTE500 G16E-GTS we change the original cast compressor wheel and employ a far larger and more efficient billet wheel and mill the compressor cover to an optimum gap to match the new compressor profile. We replace the original exhaust turbine wheel and CNC mill the turbine housing to install a larger lightweight 9 BLADE TTE exhaust turbine. We also replace the original thrust bearing for TTE upgrade 360 deg that is made in-house. 

The TTE 9 blade exhaust turbine designed by TheTurboEngineers.  Advantages are larger diameter and less blades for greater gas flow, reducing back pressure and lowering exhaust gas temperatures, allowing safer higher boost levels. This turbine is extremely light in mass so giving a reduced moment of inertia, meaning fast spool up for power potential. 

Equilibrium

Precisely balancing our turbochargers is a key critical factor to become a TTE upgrade unit as longevity and performance are paramount. Good balance improves acoustics also. Subsequent great care is taken with all TTE turbochargers to achieving our balance standards. Firstly parts are balanced at slow speeds up to 2800RPM in multiple planes using our single parts machine, then components are assembled and then the CHRA are dynamically balanced, but this time depending on application at up to 250,000 RPM in multiple planes using our in house VSR machine to acquire the ultimate equilibrium, to a standard far higher than OEM. Each turbocharger is supplied with serial numbered balance test result document.

  Product Highlights:

• Original IHI turbocharger as the base parts
• Original Genuine actuator
• Original Genuine diverter valve
• TTE Larger Billet Milled compressor 7+7 Blade 51mm inlet
• TTE Larger High-Flow 9 Blade Turbine 57mm outlet
• TTE Reinforced bearing pack
• TTE Billet Inlet adapter (uses oem Oring)
• Plug & Play installation with bigger intake 
• 400+ HP on 102 possible 
• Proven TheTurboEngineers quality
• Single parts finely balanced then components assembled and core high-speed VSR balanced
• Supplied with a balance test result document 
• Software recalibration is required & aftermarket ECU recommended 
• Made in Germany
• 1 YEAR TTE TROUBLE-FREE WARRANTY
• Exhaust housing Heat shield thermal isolation (extra cost option) 

TTE HEAT SHIELD ISOLATION ETXRA COST ADD-ON FOR THE TURBINE HOUSING

Key Features   

• Non-woven silicate fiber surrounded by welded foil 
• Stainless steel rigid insulation foil 
• High mechanical and vibration resistance, lightweight 
• Excellent fluid splash and spill resistance 
• Excellent corrosion resistance 
• Resilient at continuous temperatures up to 1300°C
• Reduced dimensions compared to turbo blankets
• Reduced engine bay temps
• Performance improvements 
• Adjacent component protection
• Up to 600°C lower temps at Isolation surface