Prices Do Not Include VAT. Shipping is calculated at checkout.
Delivery time Approx 30 Working Days
- Product Number: SW10018.13
- Upgrade Your Turbo: YOU WILL BE EMAILED INSTRUCTIONS AND PACKING SLIP FOR SENDING YOUR TURBOCHARGER/S AFTER CHECKOUT.
VAG 2.0 /1.8 EA888.3 TSI MQB TTE475 UPGRADE TURBOCHARGER
The TTE475 for the MQB 2.0L displacement motor, our evolution from the popular TTE470, sharing the same proven compressor and turbine, just now with the original recirc function. Still keeping the original turbocharger turbine but clipping the original blades for greater flow and to lower exhaust gas temperatures. We fit a bigger 7+7 blade milled billet compressor so producing extra power but focused on like OEM IS38 response
We also fit our TTE CNC silencer delete. Modifying the turbo discharge silencer, removing the original baffle internals and fitting a new straight through the section, removing any restriction and its function as a noise canceling device, and so improving the flow and enhancing the sound.
We also replace the original thrust bearing for TTE upgrade 360 deg that is made in-house.
Precisely balancing our turbochargers is a key critical factor to become a TTE upgrade unit as longevity and performance are paramount. Good balance improves acoustics also. Subsequent great care is taken with all TTE turbochargers to achieving our balance standards. Firstly parts are balanced at slow speeds up to 2800RPM in multiple planes using our single parts machine, then components are assembled and then the CHRA are dynamically balanced, but this time depending on application at up to 250,000 RPM in multiple planes using our in house VSR machine to acquire the ultimate equilibrium, to a standard far higher than OEM. Each turbocharger is supplied with serial numbered balance test result document.
- Original Genuine IS38 IHI turbocharger as the base part
- Original Genuine actuator
- Original Genuine Diverter
- Very Early Response & Spool
- TTE Billet Milled compressor 6+6 Blade
- TTE Upgrade bearing pack
- IHI Turbine clipped
- TTE CNC milled OEM silencer delete
- Plug and Play installation as IS38 turbocharger
- 475 PS Capable
- Proven TheTurboEngineers quality
- Single parts finely balanced then components assembled and core high-speed VSR balanced
- Supplied with a balance test result document
- Made in Germany
Vehicle Selection: Please note on certain generations of cars there was a turbocharger actuator revision. Please use the vehicle selection box. If the car is not listed please let us know in the comments box at check out: model & year
Please note if sending a used turbocharger for the upgrade process. TTE does not recondition the Electronic actuator or Diverter you send. Your sent items will be re-installed. Turbos must be sent complete(actuator, silencer) Do not send your diverter valve. IT IS RECOMMENDED A NEW DIVERTER VALVE IS FITTED
VW Golf 7 R, JDEngineering Stage 4: 479pk & 570Nm (98RON + 10 ethanol)
VW GOLF 7 GTI CLUBSPORT DVX PERFORMANCE SOFTWARE : 478HP 546Nm (98RON)
Don's GOLF 7R TTE475 Stage 3 tuned at CLP Automotive
454HP @1.8Bar with a nice fast spool and flat torque curve